wtb stock wheels

[shanemaster]

WTB Stock Wheels for 2000cs i have hubcaps need stock wheels

 

[corsachili]

Are 2000CS wheels the same as 3.0CS wheels? If so, I have 4 I'll sell you. They're in NorCal, and have decent rubber on them.

TJ

 

[shanemaster]

can you tell me the size, they should be 14 in and have the same look as the 3

 

[steve in reno]

Per earlier posts aren't 2000cs' 4 bolt not 5 bolt lugs/ wheel.
steve

 

[dp]

Per earlier posts aren't 2000cs' 4 bolt not 5 bolt lugs/ wheel. steve

yes

 

[shanemaster]

4 bolt/ lug

need the wheels that willtake the hub cap

 

[dave v. in nc]

2000 wheels...

The steelies that look similar to neuclasse, right? May even be the same?

 

[roadsterfan]

There was a set last week on ebay, that the guy could not sell for $100 or so. I have his phone number, if you want it. He lives half an hour east of Sacramento; his name is Chris. I bought one of his cars, but not the wheels.

 

[roadsterfan]

ooops....sorry, my mistake...They are 2800 CS wheels...5 lug aluminum....

 

[Bill Riblett]

The wheels you want are 5 1/2 x 14, 4 lugs and the only cars these fit are 2000CS and 2000 sedans. I'm not sure all the 2000 sedans had the 5 1/2" wide wheels, so if you go that route, be sure to check the width. It should be stamped in the center of the wheels.

Have you checked on the NK website? Look here:
http://nkbmw.com/board/

I have a 2000CS and have parted out 3 others, but somehow don't seem to have a spare set. Good luck.