WTB - Wiper Blade Holder - Chrome or SS - 61611352322 or 61618744145

Dave G

Active Member
Messages
57
Reaction score
34
Location
CO
WTB one 15 inch/385MM chrome or SS wiper blade holder. I have one on the car and need one more. It should fit the 9mm wide J-hook style mounts on the original wiper arms, photos below for reference. I do not need the entire wiper arms, just one more blade holder in chrome or stainless steel, polished or satin (even painted, assuming it's strippable). Preferably without slots in the top like many of the aftermarket replacements seem to have. I will consider anything between 15 and 18 inches (385-460mm). If you happen to have a pair, I will take both if you like. I've searched all over but would prefer not to incur the shipping and tariffs from overseas. I am in Colorado. Thanks! Dave
 

Attachments

  • IMG_2534.jpeg
    IMG_2534.jpeg
    53.2 KB · Views: 36
  • IMG_2533.jpeg
    IMG_2533.jpeg
    63 KB · Views: 33
  • IMG_2536.jpeg
    IMG_2536.jpeg
    132.7 KB · Views: 31
if you need the blade holder + wiper blade, i recommend that you order a set from CS Werk. i bought a pair from Chris and he shipped them with no tariff. they are a perfect match - he sells either the Bosch 515 (10 euro more) or an aftermarket set that matches perfectly.
 
Thanks! How long are the blades from CS Werk? I've seen a lot of different lengths in various posts in the forum... NVM, I see they are 40 cm :-)
 
Last edited:
I ueed these blades. Not perfect, but they were better than the black one and I needed them in a hurry. I suspect they are an inch too long, but I used them a lot on the BMW Classic CCA 20th anniversary drive (rained almost every day) and they worked perfectly.

The finish is a little bright, but I think they look okay.

Remember to drill and tap your wiper arms to ensure they don’t fly off on the highway or walk away while parked. There is a nice write-up by @Stevehose.
 
I ueed these blades. Not perfect, but they were better than the black one and I needed them in a hurry. I suspect they are an inch too long, but I used them a lot on the BMW Classic CCA 20th anniversary drive (rained almost every day) and they worked perfectly.

The finish is a little bright, but I think they look okay.

Remember to drill and tap your wiper arms to ensure they don’t fly off on the highway or walk away while parked. There is a nice write-up by @Stevehose.
Thanks. 1st link not working for me
 
here are the links for CS Werk

 
Back
Top