Wtb

[Peter Coomaraswamy]

Does anyone have the L&R side plastic pieces that go under the rear outer window chrome trim that attaches to the body and then to the trim its self. I do not know the name of the pieces.

Please PM me -

Thanks

 

[Ted D.]

Hi Peter,
Did you ever find the plastic pieces? I am in need of them.
Cheers,Ted

 

[TomHom]

Hi Ted, you will find it here

Originalteil NOS BMW E9 Archive - Seite 4 von 5 - CS Werk Bonn

Verkauf Neuteile für BMW E9 Coupé. Mehr Informationen zu den Artikeln erhält man durch einen Klick auf das Produktbild.

www.cs-werk.de

Regards
Thomas

 

[Ted D.]

Hello,

I think I may have described what I am looking for incorrectly. I is the thin plastic trim the runs from the front to the back of the lower rear window trim. I have attached a picture to show. IF anyone knows where I can source this it would be greatly appreciated.
Cheers-Ted

 

[Ohmess]

Holy resurrection Batman! This thread is more than ten years old.

I think Walloch Ness sells this stuff:

Catalog picture 41/14 - BMW 2,5 CS - 3,0 CSL (E9) - Body work | Wallothesch

www.wallothnesch.com

 

[eriknetherlands]

Holy resurrection Batman! This thread is more than ten years old.

I think Walloch Ness sells this stuff:

Catalog picture 41/14 - BMW 2,5 CS - 3,0 CSL (E9) - Body work | Wallothesch

www.wallothnesch.com

Nop, that seal is at the bottom of the door, sealing the bottom from water coming in from below.

I think @Ted D. Is looking for the black pvc type U shaped channel that is keeping the chrome trim next to the glass from touching the paint.

I think it is identical material as the profiles used on the stainless steel wheel arch trims.

 

[Keshav]

Nop, that seal is at the bottom of the door, sealing the bottom from water coming in from below.

I think @Ted D. Is looking for the black pvc type U shaped channel that is keeping the chrome trim next to the glass from touching the paint.

I think it is identical material as the profiles used on the stainless steel wheel arch trims.

this one? I’ve heard…..that the new production is not the same quality!

Keder Meterware Preis pro Meter für alle Modelle und Baujahre passend

Keder Meterware Preis pro Meter für alle Modelle und Baujahre passend

www.wallothnesch.com

 

[eriknetherlands]

@Keshav
The w&n part seems a bit high to me, the sides are to long.

I have some nos 'keder', I'll check.

 

[bavbob]

This is a simple piece of trim/gasket and I am gonna bet you can find it on the Steele Rubber Products website for cheap money.

 

[eriknetherlands]

This is what I have (but likely need for my own 4 wheel trim and door parts)
It is a U shape, its 2.6 mm wide
but one side is 5,0 mm, while the other side is 6,0mm. Each flap is 1,0 mm thick.

 

[Ted D.]

Thank you all! Sourced and appreciate you all!
Cheers,
Ted