floridabmx
Well-Known Member
- Messages
- 1,057
- Reaction score
- 380
It’s gone
Last edited:
Is that a red 9-blade fan on the front? Is it compatible with an e9? If so, I'd be interested in that with clutch (it looks to be in better condition than what I have currently).
They look like standard bmw post 74 fauxpinas
I need a few things. >>. I was able to get the left side from the factory but cannot source the right side. Another victim of the respray was that my kidney grilles became damaged. If yours are pristine I will take them. I also need a Last and most unlikely, I need the right side front bumper end (the piece that wraps to the front fender). The cover has to be in good shape on the outside, and on the inside, the studs for fixing to the body have to be all present and accounted for and firmly attached to the rubber. .
Are you working on this dismantle or what is the progress.I'd be interested in all the calipers.
Atlanta.
Gary
Rear calipers great for a 2800 CS disk brake conversion for someone??
L-Jet intake stuff useful for conversions.
Those front armrests and map pockets are worth something.
Fuel pump holder/reservoir...I'd be interested if it's cheap and not TOO crusty looking.
Aren’t both sides the same...or is there a split early/ late
View attachment 41851 View attachment 41853 View attachment 41854 View attachment 41855 Aren’t both sides the same.
Aren’t both sides the same...or is there a split early/ late
View attachment 41851 View attachment 41853 View attachment 41854 View attachment 41855 Aren’t both sides the same.
No, the sides are mirror images of each other. The part I am looking for corresponds to #11 in the parts list (although that one looks slightly different than mine).