FS: Custom made stainless steel seat rail covers

RTHLSS1

Well-Known Member
Site Donor $
Messages
467
Reaction score
337
Location
Slovenia
This is a great product. Looks great. Does anyone know if these are the same as ones in the e12? It certainly looks the same. Sorry if if this has been asked and answered already.
I have no e12 to try close to me. I will measure it and let you know.
 

zinnocoupe

Member
Messages
26
Reaction score
7
Location
North Vancouver Canada
Ok thx very much. I just took a quick look at my 77 e12. The drivers side has another piece of plastic molded as part of the plastic chrome so Its quite different I think. The chrome part appears the same.
 

Attachments

  • 65692D8F-FECC-4E2D-A688-CBBD200AFFBD.jpeg
    65692D8F-FECC-4E2D-A688-CBBD200AFFBD.jpeg
    393 KB · Views: 74

RTHLSS1

Well-Known Member
Site Donor $
Messages
467
Reaction score
337
Location
Slovenia
Ok thx very much. I just took a quick look at my 77 e12. The drivers side has another piece of plastic molded as part of the plastic chrome so Its quite different I think. The chrome part appears the same.

Different yes.
 

aearch

Well-Known Member
Site Donor $
Messages
4,106
Reaction score
588
Location
pleasant hill , ca
hi jan alan 4310316 here
those are nice dont want to rain on parade yet--
i have the 74 and my rails -get this -
have two ears at the base and slide under the seat fraame.
so there are no holes for screws. much much better lokin
just a bit of info
alan
 

RTHLSS1

Well-Known Member
Site Donor $
Messages
467
Reaction score
337
Location
Slovenia
hi jan alan 4310316 here
those are nice dont want to rain on parade yet--
i have the 74 and my rails -get this -
have two ears at the base and slide under the seat fraame.
so there are no holes for screws. much much better lokin
just a bit of info
alan

Hi Alan,
I have talked to @HusseinBM to make him set with no holes. I have already laser cut new batch. 2 sets are with no holes just need sample to see where ears are fitted and dimensions (or measurements).
 

HusseinBM

Well-Known Member
Messages
91
Reaction score
22
Hi Alan,
I have talked to @HusseinBM to make him set with no holes. I have already laser cut new batch. 2 sets are with no holes just need sample to see where ears are fitted and dimensions (or measurements).
Hi Alan,
I have been busy. I will go to the garage tomorrow and will take one of my good pieces to see how it fits and will take some pics. I will also provide the dimensions of the two ears and the location of the holes in ears.
 

HusseinBM

Well-Known Member
Messages
91
Reaction score
22
Hi Jan,

Please find attached pics with sizes. I hope they will help. The ears are 2" x 1.25" as shown in the pics.
 

Attachments

  • 20221105_182040.jpg
    20221105_182040.jpg
    176.9 KB · Views: 63
  • 20221105_183432.jpg
    20221105_183432.jpg
    206.6 KB · Views: 44
  • 20221105_182417.jpg
    20221105_182417.jpg
    128.1 KB · Views: 51
  • 20221105_182436.jpg
    20221105_182436.jpg
    131.4 KB · Views: 42
  • 20221105_183115.jpg
    20221105_183115.jpg
    247.5 KB · Views: 40
  • 20221105_183216.jpg
    20221105_183216.jpg
    170.6 KB · Views: 51
Top