E9 Csi ECU

G

Georgie22

Member
Messages
34
Reaction score
10
Location
Commugny, Switzerland
Hi everyone, I have a 1972 BMW 3.0 CSi VIN 2262612
I have an issue with the ECU it seems, do you now where I can get this repaired by someone competent.
I am based in Switzerland.
 
sfdon said:
Pretty rare for those to go bad. Have you tried borrowing a spare?

ProgRama Remanufactured Electronic Control Modules 2-3 YEAR warranty

Mercedes Benz, BMW and Volvo ECUs, Climate Control Units, Instrument Cluster repairs, Lowering modules for MB, Porsche, Bentley
www.programainc.com

www.ebay.de

BMW E3 E9 3.0 CSI ECU DME Motorsteuergerät 0 280 001 007 | eBay.de

D-Jetronic Bosch part number: 0 280 001 007, BMW part number: 13611355309.
www.ebay.de


What symptom makes you think the ecu is bad?
Click to expand...
one of the injectors is not working and thus runs on 5 cylinders. Garage cleaned the injectors and said it was the ECU that was defective.
Any idea what else it could be?
 
sfdon said:
Pretty rare for those to go bad. Have you tried borrowing a spare?

ProgRama Remanufactured Electronic Control Modules 2-3 YEAR warranty

Mercedes Benz, BMW and Volvo ECUs, Climate Control Units, Instrument Cluster repairs, Lowering modules for MB, Porsche, Bentley
www.programainc.com

www.ebay.de

BMW E3 E9 3.0 CSI ECU DME Motorsteuergerät 0 280 001 007 | eBay.de

D-Jetronic Bosch part number: 0 280 001 007, BMW part number: 13611355309.
www.ebay.de


What symptom makes you think the ecu is bad?
Click to expand...
I don't know anyone with a spare. Here in Switzerland these cars are not very popular
 
If it is 1,2,3 or 4 they are likely wrong.

The e9 forum has a djet loaning library.

You pay shipping and we loan the part.

We have Ecu’s to loan out.
 

BMW Bosch 0280001007

Repair of your BMW D-Jetronic
ecu.eu ecu.eu
IMG_1847.png
 
As fare as I know,
There are 3 cylinder are triggered together by the ECU ?

Check for broken wires from the ECU to injectors.

If not, maybe only a cold weld in the ECU.

@sfdon Already post the diagram.


Breiti
 
Last edited:
The garage didn’t need to clean the injectors to say the computer is bad…

Every shop should have a Noid light tester.

 
I think 2 drivers and 4 connectors at ecu.
Very unusual.
Firing 2 banks of 3 but using single wires to 5 and 6.
 
Name
address
phone
email

send me a PM by clicking on the sfdon icon.

I will send out a test ecu.

I’m in Amsterdam, Paris and Malaga next month- no Zurich…. Otherwise I could deliver. :)
 
Check this side

D-Jetronic Teil Anhang B: Pinbelegung der Buchsenleiste nach Herstellern

Anhang B der D-Jetronic Reihe von Dr-DJet listet die Belegung der Buchsenleiste für alle bekannten D-Jetronic Fahrzeuge. Damit könnt Ihr Eure D-Jetronic prüfen.
jetronic.org jetronic.org

Cylinder 1, 3, 5 and 2, 4, 6 have each a commen driver.

So if the electronic will be bad, you have 3 valves not working.

The rest is wiring outside the ECU or
a conductor path , a connector or a bad weld in the ECU.

Good luck

Breiti
 

Attachments

  • Screenshot_20240412-132949_Chrome.jpg
    Screenshot_20240412-132949_Chrome.jpg
    130.4 KB · Views: 99
Last edited:
sfdon said:
If it is 1,2,3 or 4 they are likely wrong.

The e9 forum has a djet loaning library.

You pay shipping and we loan the part.

We have Ecu’s to loan out.
Click to expand...
SFDon’s lending library of Djet parts is a life-saver for CSI owners, as is, of course, his knowledge. Get to know him, he is an invaluable resource.
 
You must log in or register to reply here.
Back
Top