Search results

Sure :D

I've had a non-round premium tire, so it's not only cheap tires that can have this fault even if it's much more common for the cheap ones. But if you have checked the wheel and know that's the source for the vibrations, I'd try to find someone who can repair it.

Look at my previous post with the pictures, there's a link to a DIY thread explaining how to open the gauges. Here it as well: https://e9coupe.com/forum/threads/diy-open-up-clean-the-inside-of-your-gauges.21179/

Thanks for confirming!

If you look in the thread I posted, on @Markos post, there are two 8mm nuts on the rear of the cluster that needs to come out, then you unplug the two connectors for the wires, and then undo the speedometer wire. The cluster with wiring and gauges should pop right out :) EDIT: @Belgiumbarry...

Sorry but why not do it the proper way? The results will be so, so much better compared to what you're achieving right now. It's not a big project to remove the instrument cluster, and it's well documented on the forum. https://e9coupe.com/forum/threads/speedo-gauge.27379/#post-210164 At the...

.

PM @halboyles for a Tii booster.

Okay Alan, it's just that when a "GOLDMINE" shows up on your doorstep, it just might not be. Too good to be true, and so on. Sorry I don't want to be pessimistic, but be careful, alright!

I hope he is everything he says he is. Will the stock motronic ecu really work with your "full race" S38B36? I'm very happy if you finally get it running, but I'd go with Don all day long, guaranteed success. I can't see how this craigslist technician could do it that much cheaper?

Low beam = only 2 lights on. (Look at my avatar/profile picture)

5-speed all day long if your going to drive it, changing back to the 4-speed isn't that difficult if it would become important for some reason to have the stock transmission behind your 3.5L.

+1 I got my 265/6 from Donatas as well, he's a great guy!

I know there are more ratios, the ones mentioned are from your picture and I think the one I wrote down as "CR" is the most commonly used in the e9, but I could be wrong. The "OD" is from the red and blue beast and probably a very rare bird. Feel free to edit, I just thought it would be nice to...

Gear Ratios: ZF Four Speed 1st - 3.85:1 2nd - 2.08:1 3rd - 1.375:1 4th - 1.00:1 ZF Five Speed CR 1st - 3.85:1 2nd - 2,40:1 3rd - 1.76:1 4th - 1,26:1 5th - 1.00:1 ZF Five Speed OD 1st - 2.99:1 2nd - 1.76:1 3rd - 1.30:1 4th - 1.00:1 5th - 0.87:1 Getrag 262 1st - 3.85:1 2nd - 2.20:1 3rd -...

Is there any difference in height between #1 and #3? Or is it just the front air dam creating an illusion of beeing lower? #3 looks best in my opinion.

Fully agree!

Try to find a pair of BMW e12 H&R -40mm front springs, they have been available on ebay.de The rear e12 springs wont fit the e9.

Look at this you guys, I've always been impressed, and continues to be so by how helpful everyone here is. Ask for something that doesn't exist, and still someone, @Wladek in this case, reaches out and is willing to make a one-off special for you. The spacer turned out beautiful, and the...

A couple quick edits: