Search results for query: 635csi

I have an E12 with a M30B35 and five-speed swap - the whole thing came out of an '89 635CSi and I'm guessing the trans is a 265/6 but I'm not familiar enough with the flavors of 265s to know, though I am pretty sure it's a 265 (separate bell housing.) Diff is stock E12 LSD - earlier I was trying...

New M90 head for $2,100. Interesting!

...can a properly designed Dome compensate for the loss in compression ratio? Do I need another Camshaft? Wallothnesch.com also list a head for 635CSi (up to 5/82) (11121278495). Does this head fit the early M30? These issues have probably been disscussed at length on this forum, but I'm...

...Americans have a very difficult time with the German “PFs”. Last name Pfaff, plus my career as an airline pilot equals pflyer. My ‘78 euro 635csi had the license plate pfast. In’83, I modified the engine to where it had well over 300hp, hence the plate. Is the front non-sunroof headliner...

Thanks Dave. This is my third CS, dating back to the early 80's. My 9th BMW. '68 1800, '74 2002, 2 CS', '78 euro 635csi, '82 633csi, '95 M3, '95 850i and this '74 3.0csa. BTW, do you know anyone that can make an extra ignition key? I only have one. I've got three blanks.

...e9 FPS alloy 14x6 wheels with chrome hub caps. Come with 4 free vintage tires. These have been in storage for 30+ years and look great for there age. I'm located in the SF Bay area and would prefer local pickup. I would like to get $1200 for them or possibly trade for 2002 or 635csi parts.

...been opened up and had the bump stop rubbers replaced as they go solid over time. Rears were new old stock when I bought them (2006) for a 635csi. The front struts have been converted to height adjustable with 325lb springs, the rear springs are standard but with a coil cut out to lower the...

...BMW used the same bushing geometry for ages? I don’t know, so here I am. Car is a ‘78 530i with an M30B35/Getrag 260/LSD swap from an ‘89 635CSi. In particular what I’d like to know about are front control arm bushings (or the control arm itself), rear trailing arm bushings, rear subframe...

So, despite the fact that I did not make Sharkfest, I managed to obtain my unused 79 635csi fender from New Hampshire. The delivery guy I was supposed to meet in Chattanooga extended his trip and brought the fender here. He was quite sociable too.

I had joined a while ago, then found my account locked out. I has thought maybe it was inactivity, but it turns out I hadn't paid the fee. I paid up six months ago when I picked up the barn find 79 Euro 635csi, but wouldn't recommend it to others.

Yeah, I have gotten spoiled here. Bimmerforums and Big Coupe are pretty low engagement places, particularly when browsing for parts. My Euro 635csi is going to be a slow project.

Pretty sure that's a no go. I have a 114 brain in my 79 635csi, and when I was first trying to get it started (it sat for ten years before I bought it), I swapped in an m30b35 brain. It started, but would not idle smoothly. The idle was very lumpy, almost like a muscle car with a big cam. So...

Euro SALVAGE not clean (my mistake) title e12 chassis 1978 euro 635csi runs and drives. <Clif notes> Chassis: 5545202 Transmission: Getrag 265 Dogleg shifts good. Engine: Unknown. Strongly Believed m90. Error it is a B35. Have to check dme variant. No L visible. No raised water jacket. Block...

Bosch 0280001114 Computer ECU L-Jet BMW E24 635csi series-1 m90 Euro Market. Just pulled from a running 1978/79 635csi e24 early series 1 with the original M90 engine and manual transmission can i use this on a 635 engine

I have three transmissions, one has a hole, two don’t. If yours does not I suggest that you drill it and wire it. The seals, O ring is thicker than normal, but easy to change, the shaft seal is a PITA, suggest that you buy two or three seals, they are easy to damage. Or, pay someone who knows...

yes sure, every car in Germany has a title. You say „Any car can be imported without modification“, mine doesn‘t have the original engine installed, it has a M30B35 from a 635CSi. Is that a Problem?

Location: Springfield, Ohio Price: 2,100 OBO I've got a 3.45 side loader LSD from a euro import e24 635csi for sale. The clutch packs are good, we measured 55 ft/lb of break away torque. Car had 96,670 miles (cluster swapped with import) on the odometer. We're asking 2,500 OBO +...

May be a good deal: https://bringatrailer.com/listing/1988-bmw-635csi-36/

Newer block is missing the mounting bosses on the right side you need for the stock motor mount. All E34, all but the earliest E32 motors need this. E24 635CSi blocks have them. http://www.bmw-stuff.com/proddetail.asp?prod=m30r

...tells me all I need to know about not dealing with them. If you look on car-part.com for an engine from a 1989-1993 BMW 535i, you'll find several from E34s and E32s that are closer and less money. Some even have warranties. There are some 1988-89 635CSi engines as well but they're all back...