Custom forged pistons

H

Henrik

Well-Known Member
Messages
314
Reaction score
68
Location
Oslo
Hi!
Has anybody any experience with custom forged pistons from Ireland Engineering. They are probably lighter than originals and Mahle pistons. The idea is to bore an original 3.0 CSI to 3003cm3 and use these pistons. Probably a more rev. willingly engine??

Henrik
 
I will contact him and se if he can supply these pistons or if he has any opinions about the plan.

Thanks
 
Paul makes great products.
As well as the pistons he makes a nice cam for the M30 motors.
Hopefully you can get in touch with him.
Lets us know, please.
 
I've reached out to him a couple of times in the last couple of days to see if he would post some info about his products.
 
I'll be starting to build my M10 for the 68 2000CS soon. Because of the parts car I got, I have two blocks that have never been bored to choose from and already got one block hot tanked and magna-fluxed. Now I am trying to make decisions on bore and CR.

I think I'll go 91mm on the bore and 10.5 CR which means I am currently looking at forged pistons as well. I was going to contact Ireland. I don't know Paul but it sounds like you guys have had good results. I assume he also has experience with the M10? I like Ireland for their experience with my engine type as far as recommendations and additional components.

Cheers,
Rob
 
m5bb said:
Paul makes great products.
As well as the pistons he makes a nice cam for the M30 motors.
Click to expand...

I´m also interested in a new cam, but not racing style. I´m probably in the 284 degree area.
Can a D-jetronic manage this kind of modifications at all?
 
No, the D-jet will not respond to a cam swap.

Get new D-jet OEM-pistons and a stock cam and you will have one of the sexiest engines aver made! :-)

Forged pistons might actually be heavier that stock for the M30... check before you buy!
 
Ireland Engineering predict that their forged pistons are much lighter than OEM. But I´m not sure what I will achieve by installing forged pistons instead of OEM 0.25 overbore pistons except for the price of course... Forged are almost half the price. Seems to me that W&N have bought Mahles stock (they don´t supply these anymore) and tripled the price.
 
Does anyone know where Ireland gets their pistons? I ask only because so much comes from China these days and I wonder if the alloys and processes are tested and certified.
 
HB Chris said:
Does anyone know where Ireland gets their pistons? I ask only because so much comes from China these days and I wonder if the alloys and processes are tested and certified.
Click to expand...

The forged pistons (and blank billets) are made here in southern California. If you'd like the specifics, shoot me an email Chris. Unless we spot each other at SoCalVintage.

Recently finished a redesign on the M20 pistons as well.
http://www.r3vlimited.com/board/showthread.php?t=294666
 
You must log in or register to reply here.
Back
Top