Every Thing your E3 NEEDS

i would imagine that the top of the evaporator is the same between the coupe and the bavaria ... if i could utilize the bavaria ductwork piece (that has the 2 circular duct adapters) ... then i could distribute air to each side. then the puzzle is to how the air is actually vented into the car. it might be that the old GM approach of the thin wide vent under the steering wheel panel would be a good approach.
 
Yes I am all eyes as well. How are you planning to tap into the outlet area of the evaporator?

That arrangement on the E3 *barely* blows any air out of the side round vents. I keep mine closed on the Si since I feel that little extra air coming straight out of the middle vents is more effective than diverting it and warming it up as it tries to travel the small corrugated ducts. The fan is just not that powerful (as we all know...).

The mod I am waiting to see is who can figure out what fan arrangement can be retrofitted that will blow twice as much air through the evaporator.
 
maybe we need to try to find a newer fan + evaporator that will fit in our cars ... or find a way to boost the fan speed
 
Prices Reduced everything must go if you are in need of any Bavaria Parts don't hesitate to ask all offers will be considered i need to sell everything to get rid of shell soon if interested in any parts feel free to Pm or Email me.

Email:[email protected]

Thanks
Chris
 
Prices Reduced everything must go if you are in need of any Bavaria Parts don't hesitate to ask all offers will be considered i need to sell everything to get rid of shell soon if interested in any parts feel free to Pm or Email me.

Email:[email protected]

Thanks
Chris

Shane has asked for you to include the left front wheel arch chrome/rubber trim piece for me, we don't seem to be able to connect.

Chris
 
Hi Every One,
Lots of parts left i will be heading down south to Orange county sept 19 on Saturday to deliver some Parts if any one is interested on any large items from the Bavaria and you happen to live that way nows the time so we can save on shipping if theres anything you might be interested please let me know asap.

PM or Email Me

[email protected]

Thanks
Chris
 
left tail light

Hey, I'm doing a rear lights restoration, need the left tail light reflector, and may buy the whole thing.

Can you tell me if you still have this part?

Thanks a million!

Andy
 
Hey, I'm doing a rear lights restoration, need the left tail light reflector, and may buy the whole thing.

Can you tell me if you still have this part?

Thanks a million!

Andy
Hi Andy,
Sorry just double checked other set of lights i had lenses were cracked.

Thanks
Chris
 
Reflector

Chris-
Thanks, the guy went ahead and bought another light somewhere. What he needed wasn't the lens, it was the middle piece- the metal casting with all the reflector dishes. It's the later style light, I think we're all set.

I will let you know if there's anything else he needs after I get a good look at the parts he came up with. I should be getting them here in a few days in the mail.

Thanks,
Andy
 
Chris-
Thanks, the guy went ahead and bought another light somewhere. What he needed wasn't the lens, it was the middle piece- the metal casting with all the reflector dishes. It's the later style light, I think we're all set.

I will let you know if there's anything else he needs after I get a good look at the parts he came up with. I should be getting them here in a few days in the mail.

Thanks,
Andy
Hi Andy,
Sounds great keep in touch.

Thanks
Chris
 
Back
Top