Front Belt Trim.

aearch

Well-Known Member
Site Donor $
Messages
3,787
Reaction score
394
Location
pleasant hill , ca
I need new if posssible hood, both fenders and driver door
trim pieces.
you never know.
thanks
alan
 

steve in reno

Active Member
Messages
583
Reaction score
59
Location
reno,nevada USA
Alan
Have you tried any one of our multiple sellers that are listed in the links section?
Bimmer doc and mesa performance come to mind.
They are very knowledgeable about our coupes and would be of great resource.
But that is west coast. I see that you didn't list register where you want them available.
This is a world wide registry and forum.
Need more info!
steve
 

Koopman

Well-Known Member
Site Donor
Messages
1,982
Reaction score
260
Location
Uxbridge,Ma
Hi Steve:
Not all the suppliers. I really don't care where I get them from.I also need the clips to attach the belt trim.
Thanks
Harry
 

Bill Riblett

(deceased)
Messages
734
Reaction score
4
Harry, it's not that easy! The belt trim is held on by metal studs with nuts. You need 45 of each for the whole car. All of the trim parts come from BMW, regardless of who sells them. I am almost positive that new 2000CS trim parts are not available but the studs and nuts are the same as the E9 parts.
 

Koopman

Well-Known Member
Site Donor
Messages
1,982
Reaction score
260
Location
Uxbridge,Ma
Hi Bill:
Thanks for the info.I also need marine blue velour fabric for my front seats,used or new,cover or fabric.
Thanks
Harry
 

Koopman

Well-Known Member
Site Donor
Messages
1,982
Reaction score
260
Location
Uxbridge,Ma
Hi;\ For a 2000 or a 3.0? The doors would be the same,not sure about the hood.I may have two doors with very little surface rust.
Harry
 

steve in reno

Active Member
Messages
583
Reaction score
59
Location
reno,nevada USA
Harry
You also don't give us any indication where you would like these parts to be located.
I don't care from whom you purchase or where they are located.
The forum lists suppliers that are well versed in our vehicles.
Just trying to help!
steve
 

HB Chris

Moderator
Site Donor $$
Messages
13,668
Reaction score
3,279
Location
Huntington Beach, CA
Harry, Hint: put a location in your profile, it will show up the next time you post. It helps everyone, I don't know why more don't do this.
 

carlos

New Member
Messages
15
Reaction score
0
Location
Flagstaff, AZ
Hello, I have the beltline trim available for the whole car except driver's door, which sold already. These came out of a 1970 2800CS that I have been parting out for over a year now. Some of these are posted on Ebay under user ID ctuhulu1. They are used but in very good condition, just need some polish and to replace some of the studs that are either missing, broken or rusted. Can make package deal if interested. PM me.

Thanks,
 

Koopman

Well-Known Member
Site Donor
Messages
1,982
Reaction score
260
Location
Uxbridge,Ma
belt trim

Hi Carlos,
I think the only pcs I can use are the two for the rear quarter. From what I've been told the doors are not the same as the 2000cs and that is what I need.How about blue velour seat fabric?
Please give me a price on the two rear quarter pcs.
Thanks
Koopman
 
Top