I am going to wire my driving lights and put a relay on the low beam circuit. Thanks to HBChris I have a correct relay socket coming in order to keep things stock looking under the hood. This will be used for the low beams, the Hella 160's will have its relay hidden under the left light access panel, I'll put the fuses there also. The Hella circuit will also have a plug so I can remove the headlights and leave the wires if I decide to. Please check my circuit diagram and make any suggestions/corrections. Also, what gauge wire should I use for the relay-to-lights circuits, and what amperage fuse should I use for the low beam, high beam, and driving light circuits? Does this affect the existing highbeam fuse amperage in the fuse block? Should the switch-to-relay circuits be fused also? I'll post progress of the project. Thanks.
(DELETED FIRST DRAWING - INCORRECT)
(DELETED FIRST DRAWING - INCORRECT)
Last edited: