intake runners 320i

stphers

Well-Known Member
Messages
1,050
Reaction score
511
Location
Port Moody, BC ( near Vancouver, BC )
I have 2 extra 320i intake runners is anybody looking for 2 to make a set? 20.00 ea plus shipping Just cut the ribs out and a liitle sanding perfect

Thanks, Rick
 

Attachments

  • ti engine Shalen engine sports racer 06142019 006.JPG
    ti engine Shalen engine sports racer 06142019 006.JPG
    129.5 KB · Views: 151
  • ti engine Shalen engine sports racer 06142019 007.JPG
    ti engine Shalen engine sports racer 06142019 007.JPG
    130.1 KB · Views: 149
  • ti engine Shalen engine sports racer 06142019 008.JPG
    ti engine Shalen engine sports racer 06142019 008.JPG
    128.9 KB · Views: 173

HB Chris

Well-Known Member
Site Donor $$
Messages
19,418
Reaction score
8,757
Location
Huntington Beach, CA
Looks like they also have bosses on the sides with bolt hole openings that can be removed and welded closed or you will have two bolts per runner to close them off.
 

teahead

aka "Rob"
Site Donor $
Messages
6,383
Reaction score
1,844
Location
Tacoma, WA, USA
Looks like they also have bosses on the sides with bolt hole openings that can be removed and welded closed or you will have two bolts per runner to close them off.


Are you sure the holes go all the way through? I wouldn't think so. I have a set. will have to dig them out of the box to see for sure:

s-l1600.jpg
 

rsporsche

Moderator
Site Donor $$
Messages
10,634
Reaction score
3,671
Location
Atlanta, GA
i was under the impression that they are just threaded studs that go into the metal without going all the way thru.
 

HB Chris

Well-Known Member
Site Donor $$
Messages
19,418
Reaction score
8,757
Location
Huntington Beach, CA
Perhaps these are different but the e21 ones I bought for my b35, the holes went all of the way thru. I found out I hadn’t plugged two of them when I first started the motor and I had a massive vacuum leak. Mine didn’t have the webs either.
 

stphers

Well-Known Member
Messages
1,050
Reaction score
511
Location
Port Moody, BC ( near Vancouver, BC )
Yes, on the early 320i's, 2 of the runners had the webs and 2 of them did not, you simply cut the webs out. I would do it but at only 20.00 bucks each, I think at that price, the new owner can cut them out.

Still up for sale 20.00 for each runner plus shipping
 

stphers

Well-Known Member
Messages
1,050
Reaction score
511
Location
Port Moody, BC ( near Vancouver, BC )
Still up for sale I have cut the webs out and the bosses where the 6mm holes were, they do not go right through
 

Attachments

  • Alfa wheels C runners E9  M6 parts radio 12022019 012.JPG
    Alfa wheels C runners E9 M6 parts radio 12022019 012.JPG
    126 KB · Views: 79
  • Alfa wheels C runners E9  M6 parts radio 12022019 013.JPG
    Alfa wheels C runners E9 M6 parts radio 12022019 013.JPG
    134.8 KB · Views: 80
Top