Lan-Trim front grilles, lights, indicators

[Bmachine]

also i used small vice grips to open the prongs
then just bend em back the steel is super strong

I was thinking of doing that as well. Seems less dangerous than trying to force this square peg out of it round hole.

 

[DTS]

Brilliant post deQuincy!

For the turn signals. where did you get new rubber shrouds for the turn signals where the contacts meet on the back as well as The new plastic reflectors to replace the cracked ones?

Thanks!

 

[deQuincey]

Brilliant post deQuincy!

For the turn signals. where did you get new rubber shrouds for the turn signals where the contacts meet on the back as well as The new plastic reflectors to replace the cracked ones?

Thanks!

thank you for resurrecting this thread, it has proven to be old but useful, and i admire you for searching in the forum

bought those from an uk shop, the green spark plug, it was long ago, maybe they still have them

reflectors came for preowned indicators, making one good from two medium
regards

 

[autokunst]

I just found/read this thread. Great inspiration, and will serve as a guide for this work ahead. Thank you!

 

[David]

Hello,
Wow, hard to believe this was almost 20 years ago, but this topic has always stuck with me for some reason.

More:

Thread 'Cleaning inside headlight'

Feb 4, 2013

My Marchal hi-beams have dirt / film on the inside of the lens. Time to clean or replace. Like the clean option if posible.

Very small opening to interior. Not much room to get anything more that a long Q tip... I've heard Isopropyl alcohol is to be used in lieu of water. Not sure if mild soap would be OK as well?

Any tricks / suggestion are welcome.

Thanks in advance,

John

• Lotuss7
• Replies: 9
• Forum: E9 Discussion

Did anyone find a source for MicroBalls online ? I see this:

https://www.amazon.com/System-Three-White-Glass-Microspheres/dp/B00BR2KQC2?th=1

but this reads like a filler for glues, so Im not quite sure thats correct.