More pertronix

[tronch]

Hello all
Immediately on the way to restoring my coupe, with several problems as it was a CS converted to CSI, but I want to bring it back to CS.
The problem is the distributor I have is the one with the injection and I want to use it with the carbs configuration.
Question is, should I install an ignitor? in that case with one?

Thanks to all for the help

 

[deQuincey]

pertronix is a good approach to an easy fix
undoubtedly it will smooth things down there
but your distributor is physically unable to hold the components of the pertronix, there is not a proper base for the hall sensor, and there is not an hexagonal part in the shaft for the magnet.
my advice , get a preowned cs distrib and place the pertronix in it

 

[Stevehose]

Even better get a 123ignition programmable distributor

 

[tronch]

Hi Steven
just ask yesterday to 123ignition, wichone will you recommend me?
thanks

 

[Stevehose]

If going back to carbureted engine then one of these 2:

USB connection:

123ignition

123ignition.nl

Bluetooth connection:

123ignition

123ignition.nl

The CSi requires a different model:

123ignition

123ignition.nl

Hi Steven
just ask yesterday to 123ignition, wichone will you recommend me?
thanks

 

[tronch]

Thanks to all
ill go for the 123ignition,