My fun on my 71 this weekend

chope97

chope97

Well-Known Member
Messages
257
Reaction score
82
Location
Silver Spring, MD
This past weekend I replaced the clutch master and slave cylinders. The master was a little different from my old cylinder so I had to do a little hose rerouting. I used the gravity bleed method. Easy peasy. The weather was so nice for working outside that I added a front bumper to my car that had been missing for a couple of years. Nice to get the tag off the dash. This car is a 71 Bavaria that was converted from an auto to a 5 speed by the previous owner. It also has a 3.3 engine with Webers. This car came from Boston and is Malaga.
 
dang

dang

Administrator
Site Donor
Messages
4,256
Reaction score
3,273
Location
Rocklin, CA
chope97 said:
Since my car was converted I was not sure which master to get so I got this one it was cheaper and it worked fine
www.ebay.com

OEM ATE Manual Input Transmission Clutch Master Cylinder for BMW E12 E21 E23 E24 | eBay

Made by; ATE, OEM. 1986 BMW 735i All All. 1986 BMW L7 All All. 1985 BMW 735i All All. 1984 BMW 733i All All. 1983 BMW 320i All All. 1983 BMW 733i All All. 1982 BMW 320i All All.
www.ebay.com
Click to expand...
Duh, I was thinking brake master. That's the same clutch master I just installed too. Like Chris said, a small line added and good to go. Your gravity bleed success also threw me for a loop since my brake master was a PITA. My clutch master/slave bled like yours. Good job!
 
You must log in or register to reply here.
Top