quick question

[rsporsche]

does anybody know the size of screw that was used on the rear (center) armrest that was used to fasten it to the trunk wall? mine got lost in the paint job, and its not in the orange book or on realoem ...

appreciate any knowledge
scott

 

[bavbob]

Worst scenario, metric Tap and Die set until you find the one that fits to the hole in the trunk wall.

 

[rsporsche]

yes, but that depends on if its a machine screw or a sheet metal screw. i suspect the latter, but maybe i'm wrong ... i will give that a whirl because i have a set so i can test it

 

[eriknetherlands]

I got you:
Its a sheet metal screw to start with.
I pulled my armrest from the partsstash, and got 4 screws, 3 different types

But the consensus amoung the screws, after they debated it, seems to be 4.2 mm diameter, and 16 mm long, with a PZ2 cheesehead.

 

[rsporsche]

perfect, i will give that a whirl ... very MUCH appreciated.