Feng would be in for a set at $50, as this is less than I could make them for.OK - Lets see if we start here and ask "who wants a set?" at $50.00 a set.
1. stan
2. doubledutch
3. Rek
4.
5.
6.
7.
8.
9.
10
Feng would be in for a set at $50, as this is less than I could make them for.OK - Lets see if we start here and ask "who wants a set?" at $50.00 a set.
1. stan
2. doubledutch
3. Rek
4.
5.
6.
7.
8.
9.
10
I now have the car back from the restoration shop. I'll look at the white pegs to see how loose they are. The tutorial was mostly about rebuilding the vinyl/inner foam visor. Not much was said about the hardware. It looks like the phillips screw tightens a clamp surrounding the metal post.A common illness Drew. That little Philips screw is supposed to do the trick. What about the other end, which can be pulled out? Much play there too I’d imagine? The answer is in the tutorial. Or even pm the author for advise.
I am thinking of making at least some 3D printed ones, but not for a whileIs anyone actually looking into making these? As mentioned earlier they won’t be $50.
My kid was casting brass and aluminum for fun but I couldn't get him interested, maybe if I made form molds
Are the brass sun roof pivots available? Do they work well?I am in !