You want a hint?
Take the wheels off. Ah- so nice and open now.
Car on 4 jackstands.
Swivel is key- available at Harbor Freight for a few bucks.
http://www.kmart.com/craftsman-impact-swivel-universal-joint-socket-adapter-3-8/p-00923766000P
You only need a short 13mm and a short 17mm socket for bellhousing.
You need 2 long and 1 medium extensions.
Use the breaker bar to loosen. Trust me on this.....
Use the flash light. Trust........
Re-assemble with a 1/2" ratchet and adapter.
Use a tranny jack.
For re-assembly slide the tranny onto the jack once they are both under the car.
Jack goes behind the tranny- never in front. 3x harder in front. You will need two men to lift one end of the tranny while you slide the jack under it.
Jack the car up in the front right side, remove the stand and now you can slide the tranny in and out past the frame rails behind the front strut.
Once all bolts are out - use a regular screwdriver to pry at the bottom where you see the teeth.