Wanted: stock carbs or trip webers to rebuild

bossrobot

Well-Known Member
Site Donor
Messages
347
Reaction score
109
Location
Berkeley ca.
I have a couple of kits to rebuild the stock Solex Carbs. So, I want to try my hand at going through the stock carbs.
I am also open to try rebuilding triple Webers, but have not found any.

Let me know if you have rebuildable Solex or triple webers carbs.
Thanks
 

shanon

Well-Known Member
Messages
2,026
Reaction score
562
Location
NorCal
sidedrafts are much easier to rebuild than downdrafts...but you have one more to do ;)
 

Ohmess

I wanna DRIVE!
Site Donor $
Messages
4,833
Reaction score
2,639
Location
Aiken, SC
I have 2 x 32/36 downdrafts now and I am not that happy with them. I would very much prefer side draft triples

Those are the carbs I pulled from my car when I went to side draft triples. Needless to say, I recommend the change.
 

mulberryworks

Mr. Fixity
Site Donor
Messages
1,243
Reaction score
612
Location
Jacksonville FL
I have .Walker kits. I will reach out to that member

I had read somewhere that the float valves in non OEM rebuild kits generally aren't as good as reusing your stock float valves. I cleaned mine with an ultrasonic cleaner and reinstalled them with new gaskets. So far, so good. Your mileage may vary.
 
Top