Hi again Don
thanks for attaching the picture of starter motor relay. I was able to buy the relay at "RogersTii". they have it in stock!
Could you do me a favor?
I am in the middle of replacing to the injector from the carburetor. and I think I have done most of work.
but, I bumped into a problem. I recently purchased OEM ignition distributor at 123.COM. but, I can not figure out How Ignition distributor’s wiring connect to Original wiring from injector. do you know how does it work?
dear
@Naito ,
i suggest you open a thread for technical discussion on the "general question" or in the "projects and restoration" folders
it will be easier to follow and people will find and respond there
IMHO (take this in between brackets as i do not have an injection car), but i think that distribution has nothing to connect with fuel management, i mean, usually only one cable comes out from the stock distributor and this is the cable that provides the sequential impulse to the coil, it is hooked to the (-) 1 end in the coil, the rest of the cables comming off the distrib cap are the thick black ones going to the top of the coil and to the spark plugs (again, this is in carbed cars, lets see what experts know about injection cars)
i see that your 123 distrib has many cables, so something is different there...
my advise is to open a new thread on this topic in the apropriate folder
regards