WTB: Underdash, Fuse door hinge

[tferrer]

Hi folks. So I'm looking for the cad plated hinge that the fuse door rides on.

It's #3 in the schematic below. Not looking for the fuse door, just the hinge.

 

[bavbob]

I will send you dimensions if you want so you can search on line......if you dont have the old one, probably find a great match with little cost.

 

[Dick Steinkamp]

I have one for an E3. E3 PN is 51161800659. E9 is 51161811002. If the E3 is longer than the E9, perhaps the E3 could be cut down?

If that is a possibility...Bob, can you post the dimensions and I'll measure my E3 one.

 

[boonies]

My interior is apart, attached you will find pictures and a quick drawing of the portion of the hinge assembly that bolts to the car.

Hope this helps

 

[Dick Steinkamp]

My E3 one is 20 CM long. The width per side is 2CM like the E9 one. The holes are oval rather than round.

You could cut 2.5 CM off each side and drill the outer holes to the E9 location.

It's yours if you can use it.

 

[Koopman]

I believe I have one. Will let you know early next week when I get to the storage house.

 

[tferrer]

Thanks for all the help guys! Someone super generous has reached out and is looking for a spare hinge currently.

Great group on this forum!

 

[tferrer]

Thanks to a generous forum member, I no longer need this hinge!