Andy the aussie
Well-Known Member
Gazz you still got this box ?
we are talking about a 262 four speed yes ?
2.5 cs automatic transmission
- Thread starter Andy the aussie
- Start date
we are talking about a 262 four speed yes ?
Yes I still have the box. I can take some pics if you want and send them to your email address. I know it came out of either an E9 or an E3. How do I verify it as a 262 4 speed?
Not sure how I'll ship it. I guess I could make up a crate out of pine studs screwed together.
Not sure how I'll ship it. I guess I could make up a crate out of pine studs screwed together.
Thanks Don. I feel like big brother is watching. A good big brother that is, the kind you want watching, not the Orwellian one.
Unless you are secretly working for the Dept of Public Enquiry, DOPE, a quasi non governmental organisation, QANGO, that monitors public information via early algorithmic response systems, EARS.
Having revealed that I suppose I'll be on the candidate hitlist utilising missing person statistics, CHUMPS. And all because of a gearbox!
Unless you are secretly working for the Dept of Public Enquiry, DOPE, a quasi non governmental organisation, QANGO, that monitors public information via early algorithmic response systems, EARS.
Having revealed that I suppose I'll be on the candidate hitlist utilising missing person statistics, CHUMPS. And all because of a gearbox!
Andy the aussie
Well-Known Member
yes pics please
Here you go. Definitely a model correct 262 4 speed. Turns freely, no crunching or resistance and no leaks.
Unfortunately I no longer have the drive cable or the pedal box. I would try Dean at Peninsula BM for those plus any other parts for a conversion. Manual box transforms the car. If you get stuck I may be able to source a pedal box and a bell housing locally.
Unfortunately I no longer have the drive cable or the pedal box. I would try Dean at Peninsula BM for those plus any other parts for a conversion. Manual box transforms the car. If you get stuck I may be able to source a pedal box and a bell housing locally.
Attachments
Last edited:
I might have a bell housing in my parts skip.
Want me to check?
Want me to check?
And you don’t need to change the pedal box, it should have a designated punch out hole for the clutch master. 74 got the huge spring version, you need both pedals and the long bolt.
Andy the aussie
Well-Known Member
Leave it with me as it's off site and don't want to get arrested for non-essential travel
I've some other parts that may interest you so send me a DM if you like.
I have sourced a pedal box and a bell housing both of which I can get immediately. Still in negotiations over $. May be able to get some shifter parts.
Andy the aussie
Well-Known Member
how did you go Gazz ?
$150 for the pedal box and bell housing. I can get pics if I can work out an excuse to travel there. It's not far. Where are you?
Andy the aussie
Well-Known Member
Hi Andy,
were you looking for a 2.5 badge for your car? If so, you can buy a new one from Christoph.
Nachfertigungen und Originalteile für klassische BMW - CS Werk Bonn
Nachfertigungen und Originalteile für klassische BMW - CS Werk Bonn. Anfertigung von Ersatzteilen oder Ausstattungsteilen die nicht mehr erhältlich sind.
www.cs-werk.de