73 POLARIS E3 BUILD...Slowly..

Yeah, makes sense. Luckily, she’ll be garaged anytime not being driven, so that should cut down on the UV exposure…
 
Well, unless I have a nervous breakdown (which is still possible) I should be painting the first round of parts tomorrow. Hood/trunk/doors.. I ended up making the garage into an airtight 'Dexter' room...plastic on the outside with filters at the bottom to control where the air comes in. Turned on the big exhaust fan and it's definitely creating some serious suction and the plastic is sucked tight to the door.(it was off in this pic). Yes! Opening the door into the house caused a huge surge of cold air to leave the living space..maybe I'll do that again in the morning to make sure it's nice and cool. Air is low to the ground and I'll wet the floor before I spray... Plan is to shoot very early in the morning while the temp is around 70ºF... Very nervous.
I'll report back if everything goes alright...if not, you'll hear about it on the news...;)
paintbooth1.jpg
Paintbooth2.jpg
 
Well, that's the first group of pieces. It didn't lay down quite as well as I'd hoped, but I'll have no problem wet sanding/buffing it smooth. Such a small space to shoot in...but happy to have color going down! Just have to clear this stuff out of the garage to shoot the body..can't wait till this part is over. I hate paint/bodywork...a lot.

IMG_1804.jpg
 
Congrats! You are in a pretty exclusive club by personally taking on the body work and painting of a show quality car. I like your fixtures to hold the doors and lids.
 
Dick Steinkamp said:
Congrats! You are in a pretty exclusive club by personally taking on the body work and painting of a show quality car. I like your fixtures to hold the doors and lids.
Click to expand...
Thanks! Show quality will depend on my wet sanding/buffing skills…thankfully, I think I’m okay there..lol. I did an enormous amount of prep work..the body was quite smooth before shooting..hopefully after sanding it’ll still be the case..I have huge respect for the guys that can spray out glassy finishes right off the gun. True art form that I have just not been able to master..

I had extra steel from other work and figured the stands would be really helpful in the small space..they have proven themselves invaluable! I’ll cut them apart and repurpose the steel when I’m done. I will need to roll them outside to do the body..which will have to be in a day or two..work calls…:-/.
 
Almost done sanding the driver’s side of the car. Just have the drivers side back door to do..pic of the driver door. Looks great in pics, looks pretty good in person. I’m just losing the desire to finish paint/bodywork... It’s zero fun..especially when it doesn’t end up perfect. I imagine it’ll be a really nice driver, but not so nice I’m scared to drive it.
IMG_1883.jpeg
 
CSteve said:
It's going to be amazing! You should apply for a patent on the door stands.
Click to expand...
Amazing might be a bit strong...pretty darn nice would be a great goal for me...lol
I did like my door stands...ended up being quite handy in my limited space...:-). Amazing what a welder and scrap metal can do for ya...now they need to be cut apart to go back to being scrap metal...
 
rsporsche said:
really nice fit + finish. going to be an amazing e3.
Click to expand...
Thanks!
The gaps are sooo tough to get right. I’ll probably wait until I get it on its wheels to really fiddle with it too much, as I imagine it’ll settle a bit when it’s off the cradle. I want to be done with sanding and buffing asap. I’m going to sand and respray the trunk and hood as I just don’t like the finish..sucks, but better to just get it done better.
 
You must log in or register to reply here.
Back
Top