73 POLARIS E3 BUILD...Slowly..

rblongboarder said:
Since your E3 is completely dismantled, and is an empty chassis on a caster-based rotisserie.... I wondered if you could photograph the chassis exterior from all sides? And possibly include additional photographs of the stripped out interior?

Those photos would be really useful for other E3 owners contemplating a complete teardown and rebuild...
Click to expand...
Absolutely! I’ll start compiling pics over this next week and try to document the whole car.
 
I got the reflector holes all welded up and glazed. Then I went a little crazy and welded up the exhaust exit under the valence. I just don’t like the sharp turns it takes at the end and it feels more accurate to have it exit a straight shot out the rear..:-). Ran out of sanding discs to dress the welds..funny, I wouldn’t have thought there would be filler on that panel. I’m guessing a PO backed into something down low at some point?
I’ll have to buy a muffler to decide exactly where to cut a new opening. Any recs for a nice round muffler that’ll sound tastier than stock? I’ll be making a new system anyway, so no worries on fitting to the old stuff.
IMG_0201.jpeg
 
You must log in or register to reply here.
Back
Top